Send Message
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Observe the proper disassembly method, first remove the external accessories, covers, tubes, etc. Disassemble in the order of the table and the inside; disassemble the entire machine into several parts, and then unload the components and parts; use a reasonable disassembly tool. The tools used for disassembly must be compatible with the parts being disassembled. For example, when disassembling the threaded connecting piece, it is necessary to use a suitable wrench, avoiding damage to the parts caused by chaos, shovel, and knocking, and it is not possible to use a measuring tool, a pliers, a wrench, etc. instead of a hammer.
Create conditions for assembly. When disassembling the parts, especially for non-interchangeable parts, they should be marked or sorted in pairs to facilitate easy assembly back to the assembly, to ensure assembly accuracy and reduce wear. Mechanical Disassembly Principle There are many types of printing machinery. The following general principles should be observed when disassembling: Preparations before disassembly There are many types of printing machinery, and there are many types of models. Before disassembly, you must understand the disassembly of the typical parts of the machinery.
The method of disassembling the static fit connector of the static fit connector is related to the interference of the fit. When the interference is small, it can be removed by means of a thin rod straight pull method or a roller shaft method. It can also be tapped with a hardwood hammer; when the interference is large, it can be removed by heating and pressing. Disassembly of the threaded connector The tools for removing the threaded connector are mainly various types of wrenches. When selecting a wrench, the size must be appropriate. The open-end wrench is better than the live-end wrench. The wrench or socket wrench is better than the open-end wrench, and the wrench and the sleeve are pulled. Demolition of the broken head screw with broken or rusted thread connection Since there is no nut to be disassembled, other methods must be used. Generally, drill a proper size hole on the broken head screw, drive a tap or cut into the reverse direction. Thread and screw in the reverse threaded screw and then unscrew it in the direction of the general removal bolt.
Email ke pemasok ini
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.